Supporting multiple Source intelligent central control at the same time; master-slave gateway functionKnob control with rotary useProximity detection: Built-in proximity sensor for detecting human motion. Once the sensor detects near human motion, the touch screen automatically wakes upPhysical buttons for turning off or enabling the microphone and the display with one touchThis device must be used with the base, which can be optional with three power interfaces—Power consumption : ≤15WInput voltage : Zigbee interface: 100 ~ 240V AC, 50/60Hz; Buspro interface: 18 –28V DC; KNX interface: 21 – 30V DCKNX auxilary voltage : 18 – 28V DCOutput channel : Zigbee / Buspro / KNX interface：2CH，3A/CH; Resistive load:≤660W/CH; Capacitive load: ≤200W/CHCommunication protocol : HDL LINK, WiFi 2.4GMain chip : RK3566Storage capacity : 2 16GBOperating frenquency : 2.4GHz, 5GHzIndoor communication distance (barrierfree) : ≤50mOperating system : Android 11Ethernet interface : RJ45Touch screen : 10-inch capacitive touchscreen, resolution: 1200*2000, with multitouch technologyKnob : 30 levels of feedback for rotating, clicking and long-pressing;Turning the knob to adjust the light, curtains, volume, temperature,wind speed, etc.;Knob light : RGB light beadsMicrophone : 4 microphonesSpeaker : 1W*2Proximity sensor : A maximum sensing distance of 100cm, default: 50cm (can bemodified in the settings page)Light Sensor : Automatically adjusts screen brightness according to light levelTemperature & humidity sensor : Monitor the temperature and humidity of the environmentMIC button : Enable/disable microphonePower button : Short press to close the display, long press to restart the deviceType-C interface : For upgrading or temporarily powering panelsWorking temperature : -5℃ ~ 45℃Working relative humidity : ≤90%RH, non-condensedStorage temperature : -20℃ ~ 60℃Storage relative humidity : ≤93%RHDimensions (W X H X D) : 301.3*155.2*9.8mm（Without power interface, see Figure 4）Net weight Source 10 : (With bracket，without power interface：1000g)Housing material Source 10 ：Metal； Zigbee/Buspro/KNX interface：PCInstallation : Wall box （up to 2 power interfaces installed）IP degree (compliant with EN 60529) : IP20 —
